CandorCushion™ 15 x 20 cm SMALL.
Optimum Temperature: 165˚F (73˚C)
Heat in an AirFlow™ Oven for 10 minutes, or in a Classic Oven for 20 minutes. Klarity AccuCushions® will become soft and easily moldable when material is fully heated and ready to use. To prepare in a waterbath, leave the cushion in the plastic cover and heat for 5 minutes per side – and keep the lid shut – no peeking. Cushions can also be placed in a blanket warmer and left in for several hours. AccuCushions® can be left in a heating device longer than the required heating time – an hour is safe. Do not heat them at a higher temperature than 165˚F as the pellets will shrink.
The material normally sets in 7-10 minutes, with a working time of 3-4 minutes, depending on thickness and room temperature.
Klarity AccuCushions® can be reheated and remolded as needed per single patient. Place cushions back in an oven for complete remolding, or use a hair dryer or heat gun for spot-treatment. Usually, if they have to be completely remolded more than twice, it’s recommended to start over with a fresh cushion.
- MRI SOLUTIONS
- FEATURED PRODUCTS
- PRODUCT LINE
- SHEETS & VISOR